The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.


Ring Video Doorbell lets you watch over your home and answer the door from your smartphone, tablet and PC. It sends you instant mobile alerts when people press your Doorbell or trigger the built-in motion sensors. And when you answer the alert, you can see, hear and speak to people on your property from anywhere. Ring Video Doorbell comes with everything you need to get it set up in just minutes. It can be powered by its internal rechargeable battery, or you can connect it to existing doorbell wiring for non-stop power. It also comes with a free 30-day trial of Ring Video Recording, so you can review, save and share all your Ring videos at anytime, anywhere.


The Ring Doorbell Pro is one of the most popular smart doorbells on the market and thousands of people across the country have raced to install the new doorbells. With Amazon's acquisition of Ring, I'm sure there are many feature upgrades in the pipeline. They have good picture quality and integrate well the existing suite of ring products.  We've been flooded with questions about what transformer to use with Ring Doorbell Pro and some of the common questions that come up during installation. So we tapped into our home automation partner companies Same Day Smart Homes & Greenfii to solve some of the questions we've been asked related to providing power to the Ring Pro Doorbell and what transformer to use with the Ring Doorbell Pro. 


The solution is to get a mesh wireless network system like Eero that will allow you to place a range extender beacon right near your front door if you need it. There are other range extenders and mesh wifi networks on the market but I have found that many of them don't support the bandwidth required by smart home camera or doorbell devices. The Eero shines with smart home cameras and delivers a reliable wifi network throughout your house and outside of your house if you the Eero Beacons on the exterior walls. I personally use Eero in my home and it was the best upgrade we could have made for our wifi system. We have a strong reliable signal throughout the house and I can track the data usage of each device connected to the network to diagnose if there are any issues. 

Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.
Whatever connection your doorbell ends up using, Ring recommends having a broadband upload speed of at least 1Mbps, with 2Mbps preferred. That’s typically not a problem with cable modems, but it can present a challenge to DSL gateways. The video doorbell won’t use this uplink connection all the time, it’s active only while you’re streaming video or when its motion detection triggers video capture that’s uploaded to the cloud.

Moving on...If you are installing the hard wired RIng doorbell version (not wireless) just remember to shut off the power to the doorbell prior to installing. I installed the doorbell, downloaded the free application for my wife and I, added the adapters to my current doorbell, and set the "Motion Zone". The entire process took approximately 40 minutes. Having the set "Motion Zones" helps us out a lot so we do not get "Motion Detected" alerts from people on the sidewalk but anything closer to my home it goes off. Everything works flawlessly and the speaker sounds great. Images and video during day and night are clear. No issues hearing the person at my door nor them hearing me. My wife loved it as much as I did and we decided to get a second one for our second door (plus it was a Amazon special we could not pass up!).


Snaplight lightbars create instant safe reliable light during Snaplight lightbars create instant safe reliable light during power outages evacuations severe weather and other emergencies. Fast-acting design turns on in a snap by mixing safe chemicals in a plastic casing to create instant light. Convenient hook allows simple placement in an optimal location.  More + Product Details Close
Ring’s Alarm, which is finally shipping to customers starting today, is the latest in these new, do-it-yourself home security systems. It’s most similar to the Secure system that Nest released last year, and uses a variety of motion, entryway, and fire / carbon monoxide sensors, along with Ring’s other home security cameras to monitor your home for emergencies and intrusions.
If the base station is the control center for your Ring devices, then the Amazon Echo Show is the main stage. This 10.1-inch HD screen with built-in speakers was practically made to complement your home security system. Set it up in the kitchen or living room, and you’ll be instantly connected to video and notifications from around your home. Someone at the door but you’re making dinner? Use the Amazon Echo Show to see who’s arrived. In addition to syncing with cameras and alarms, it can even listen for the sound of smoke detectors or broken glass. Talk about a smart security product.
With the Ring Video Doorbell Pro, I managed to almost eliminate false alarms, so that just about the only thing that set off an alert was an actual person at my front door. I occasionally got an evening alert when a car with exceptionally strong headlights went by—I presume because it illuminated the lawn and that was interpreted as movement—but the level was much lower.

Oco Pro Cloud Video Surveillance Camera is easy Oco Pro Cloud Video Surveillance Camera is easy to use HD Wi-Fi camera with Cloud and SD card Recording for monitoring everything you care about: business home children pets elderly parents etc. No Monthly Fees required to access all camera features: Self-learning motion detection system helps Oco understand motion and ...  More + Product Details Close
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
The most useful product offered by Nest that the Ring system does not have is a connected lock. This tamper‑proof, key‑free deadbolt connects to the Nest app, letting you lock and unlock your door remotely. Users can also create passcodes for family, guests and people they trust, or give them a Nest Tag programmed to let them in only at certain times of the day.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
Yes & No. If you are already in the Ring ecosystem the Ring Security system is a good option to increase the security level of your home. You can use the Ring Security System with or without an alarm monitoring package, so you can choose the alarm professionally monitored or you can monitor it yourself which means you will be alerted if there is an issue and it will alarm but you will be responsible for calling the alarm company in the event of an emergency. 
If you unscrew your old doorbell you will see that there are two wires running to it and two terminals. You can take a multi-meter and measure the voltage across the two terminals. If it reads  in the range of 16V-24V you most likely have enough power for your Ring Doorbell Pro, but you sill need to check the amperage. We recommend the multi-meter below because it is the simplest to use without extensive knowledge of electrical workings. It has auto-ranging meaning you only need to turn the multimeter to the correct dial and it will tell what the voltage is. The correct "dial" setting to measure voltage is the "V" with the lines on top.  Even if your voltage is reading 16V you still need to check that you have 30VA of amperage from the transformer as this is the recommended amperage requirements from the manufacturer of the Ring Pro Doorbell. 
One of the first things I did on the Pro was to draw the precise area I wanted the camera to monitor for motion. This process is done in the mobile app, using your finger, and allows you to highlight a sidewalk but ignore the street or an area where, perhaps, you have a wind chime hanging. As you can see above, I highlighted my entire entryway, sidewalk, and driveway. The street is eliminated completely.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
Here up for auction, at NO RESERVE, is this Ring video doorbell in its original opened package. Guaranteed to work and includes installation hardware. You will need to download smartphone app (Android, Windows, Apple). We are pawn operation and this is how the item was brought in to us. Any specific history (ie. customizations, time usage, etc.) may not be known. We ship to US locations only within 1 business day of payment. This is an auction only and "buy it now" inquiries will not be considered outside of any "buy it now" price available in the listing so BID AWAY!! Thanks for stopping by and GOOD LUCK!!!
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
Throughout testing, I liked how I could verify the comings and goings of our dog walker simply by listening for the sound of the chime. The motion alert feature is ultra-sensitive, so I had to decrease its range to reduce false positives. I also found that it doesn’t begin recording video until someone has been at the door for a few moments. For example, the doorbell recorded a video of a delivery person leaving my door step, but I didn’t get video of him approaching and leaving my package.
×