The upshot: When that sketchy person comes to your door asking for “charitable donations,” you can compliment his appearance—nice prison tats!—and tell him you’re too busy to talk right now. Who knows, maybe you’re feeding your Belgian Malinois attack dogs. Or are you? The robber will never know that you’re actually speaking to him from a restaurant. In another state.

Sometimes you can't find your doorbell transformer, or it's inaccessible, or the engraving on the side of the transformer has worn off and there is no way inspect the transformer and determine how much voltage it is putting out. In those cases, go ahead and try and install the Ring Pro Doorbell, follow all of the instructions in the Ring app and the worst case scenario is that your Ring doesn't have enough power.  Your Ring doorbell will indicate that it does not have enough power by either not working or once you install it you can go to the settings menu and check the "device health" tab and it will show you the amount of power the doorbell is receiving. . If our Ring Pro Doorbell does not have enough power you will need to upgrade your transformer to one of the two transformers we have recommended above or you can find them at the links below: 


Below the Live View button is a series of feature buttons. Event History takes you to the same events list that you'll see in the My Devices screen; Device Health lets you check voltage, Wi-Fi signal strength, and system status; Linked Chimes is where you go to pair the doorbell with an external plug-in Ring Chime ($29) or Chime Pro ($49); and Motion Settings lets you adjust motion sensitivity, set up motion zones, and create a motion schedule that determines when motion alerts are active.
The solution is to get a mesh wireless network system like Eero that will allow you to place a range extender beacon right near your front door if you need it. There are other range extenders and mesh wifi networks on the market but I have found that many of them don't support the bandwidth required by smart home camera or doorbell devices. The Eero shines with smart home cameras and delivers a reliable wifi network throughout your house and outside of your house if you the Eero Beacons on the exterior walls. I personally use Eero in my home and it was the best upgrade we could have made for our wifi system. We have a strong reliable signal throughout the house and I can track the data usage of each device connected to the network to diagnose if there are any issues. 
The Base Station keeps your Alarm system online and connected to your mobile devices. It connects to your home network via ethernet or wi-fi and links to all your Alarm components and select third-party devices via Z-Wave. Also included are a built-in 110-decibel siren, 24-hour backup battery and optional cellular backup (with a Ring Protect Plus subscription).
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.

How To: Wemo Light Switch Installation No Neutral Wire. We teach you what you can do if you don’t have a neutral wire in your existing switch boxes but still want to install a Wemo light switch. There are four alternative options for installing a Wemo light switch with no neutral wire. We tell you how you can add a neutral wire to your existing switch box so you can install a wemo lights switch or use another smart light switch that has all of the same features as the wemo light switch but does not require a neutral wire. If you don’t want to do any wiring in your home and you don’t have an existing neutral wire you can also you smart light bulbs like the phillips hue light bulbs instead of the wemo light switch. We teach you how you can connect any of your smart light switches to Amazon Alexa for full voice control of your home.
Unfortunately, there’s no video-on-demand (VOD) feature that lets you view the outside world whenever you want. Instead, you have to wait for someone to approach the door. VOD appears to be on many users’ wish lists, and Ring says it’s working on adding that feature. With VOD built-in, the doorbell would instantaneously turn into a full-featured security camera, so let’s hope we see this addition soon.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
After I installed the second Ring I noticed I was not able to connect as quickly and sometimes not at all to the doorbell. I watched a few YouTube videos for troubleshooting and BOOM! I found the issue (I can not fault Ring for this). My current doorbell transformer was only max 16V of power. I went and purchased a max 24V transformer and a plug-in WiFi extender (approximately $50 total for both). This solved the issue and we were able to connect to both doorbells with no problems. Since July of 2017, and the upgrades, we have had no issues. We had temperatures as low as -20 degrees Fahrenheit and they were still working.
Each piece of Ring's kit is designed to protect a different part of your house. The contact sensors detect when windows and doors are opened or closed; the motion detectors use infrared beams to sense movement and heat in a room; the keypad lets you arm and disarm the system; the base station keeps the system online, and has a 110-decibel siren that sounds when motion is detected; and the range extender keeps the sensors connected to the base station. Both the base station and range extender have a 24-hour battery backup that will keep the system online in case of a power outage.
If your existing transformer is 16V or 24V and looks like either of the below with an amperage rating of at least 30VA, your existing transformer is compatible with the Ring Pro Doorbell. You can also click on the image below and it will take you too the two transformers we recommend for the Ring Pro Doorbell that we have tested that we know will work.  If you have really long wiring runs or multiple doorbells you should get the 24V transformer. If your transformer runs are less than 60-80FT and you only have one doorbell the 16V transformer should be enough power. If you are unsure of your existing wiring length you should use the higher voltage 24V transformer for the Ring Pro Doorbell. Not all 24V transformers have a high enough amperage rating to provide enough power to the Ring Doorbell Pro some have a 24V voltage rating but only put out 10VA (amperage) which wont provide enough power to the ring pro doorbell. We have found a 24V transformer on amazon that puts out 40VA (amperage) and is compatible with the ring doorbell pro. Don't deviate and try to get a cheaper 24V option because the other options on amazon don't have enough voltage. Going with the 24V-40VA transformer option below will save you time and headaches down the road if you have a long run of wiring. 
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.

The Ring Alarm is equipped with the hardware to serve as a smart hub, though it's not quite there yet. While the base station contains both ZigBee and Z-Wave radios, only the latter is user- accessible, and any noncertified third-party devices that are paired won't trigger the alarm. You can pair Z-Wave products through the Ring app, but they'll only use the base station as a bridge.

Given the plethora of user-friendly and accessible security systems out there, there’s no shortage of good options. One of our favorite systems comes from Ring, a global home security company owned by Amazon. While its offerings may not be as flashy as those from Nest, which was acquired by Google’s parent company Alphabet in 2014, Ring is a relatively simple and affordable home security option. Wi-Fi-enabled, it easily mounts on walls or flat surfaces and can be set up in less than an hour. Pair this with the company’s diverse product line and excellent customer service, and you have a system that will work hard for your home (without you having to work too hard yourself).


Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
Update 1/24/16 - I have found a fantastic use for the Ring Doorbell and Chime. My mother-in-law, now in her 90s, lives by herself. She has become hard-of-hearing and often does not hear the doorbell. By installing the Ring on her door, she now is bothered much less (solicitors tend to recognize it and don't seem to like it) and when someone rings the bell, the Chime, placed by her favorite chair, gives her a better chance of hearing someone at the door.
×