So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
Getting this much capable home security hardware for $199 is an absolute bargain (the system became available for purchase today). Adding door/window sensors for $20 each and motion sensors for $30 is an absolute bargain. Paying $10 a month for professional monitoring and video storage in the cloud for an unlimited number of Ring security cameras is an absolute bargain. Ring Alarm will be a huge hit with people looking for a straightforward, easy-to-use home security system.
By purchasing this system you’re almost certain that they will come out with upgrades and updates to this product and ways to integrate it with Alexa and smart home devices. If you encounter any kind of issues, they will have someone listen to you and actually give you a solution rather than one of these knock off Chinese products that will give you excuses for faulty behavior but not solutions.
After I installed the second Ring I noticed I was not able to connect as quickly and sometimes not at all to the doorbell. I watched a few YouTube videos for troubleshooting and BOOM! I found the issue (I can not fault Ring for this). My current doorbell transformer was only max 16V of power. I went and purchased a max 24V transformer and a plug-in WiFi extender (approximately $50 total for both). This solved the issue and we were able to connect to both doorbells with no problems. Since July of 2017, and the upgrades, we have had no issues. We had temperatures as low as -20 degrees Fahrenheit and they were still working.
I went with the Ring Pro over the Original Ring because I was going to be wiring it in place anyway. I also like the slender profile and the possibility to use wireless 5.0 in the future if I desire. Plus I live on a very busy road and wanted the advanced motion detection zones on the pro. Since I did my research, I was aware that the Ring Pro has a 160 degree field of view compared to the 180 degree view of the original. For this reason, I purchased fiberglass shims to angle it more towards my large 6 foot doors when I installed it.
The Ring Pro delivered very sharp 1080p video in testing. Daytime video was clean with rich colors, and night vision video was well lit with good contrast and remained sharp out to around 20 feet. There was noticeable barrel distortion around the edges, but people and objects appeared normal. Two-way audio was loud and clean, unlike the original Ring Doorbell which would become garbled on occasion.
The bottom half of the screen contains a historical list of all events (rings, motion triggers, and live view requests). Tap any event to view the associated video clip, share it, delete it, or save it. Tapping the Ring Pro button takes you to a screen where you can enable and disable ring alerts and motion alerts, view live video, and access the doorbell settings. When you tap the Live View button it launches a live stream presented in full-screen landscape mode and has buttons for two-way audio, speaker mute, and neighborhood sharing.
In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
I opened the app, tapped Set Up Device, selected Doorbells, and selected the Pro from the list of choices. I named the device, entered my address (optional), and hit Continue. At this point you can play an instructional video if you're having difficulty. Next I was asked what type of bell my existing doorbell uses (mechanical, digital, none) and was prompted to press and release the button on the side of the Pro, at which point a voice informed me that I was entering setup mode. I hit Continue and was prompted to navigate to my phone's Wi-Fi settings and connect to the Ring network. I returned to the app and selected my home Wi-Fi SSID, entered my password, and waited around 20 seconds before the doorbell was connected. I attached the faceplate and was finished.
Like most security systems, Ring Alarm has two armed modes: Home activates the door/window sensors, but leaves the motion sensor turned off. This allows you to walk around inside your secured home without triggering the alarm. Away mode arms all the sensors, so if intruders break in through an entry point that isn’t protected by a sensor, the motion sensor will trigger the alarm when they walk within its range. One motion sensor can do the work of many door/window sensors.
Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."
It doesn't work with the Amazon Cloud Cam indoor home security camera, either. Here's what a Ring spokesperson had to say about it: "Ring Alarm does not work with Amazon Cloud Cam at this time. While I can't comment on the roadmap at this time, what I can tell you is that we will make product decisions based on what will best empower Neighbors with an affordable, effective way to monitor their homes."
I installed a motion sensor inside a shed in my backyard (shed has a tin metal roof) and I kept getting a false alarm daily usually around 1 or 2pm; Ring informed me that their motion sensors use infrared technology and that excessive heat could cause a false trigger. They told me a contact sensor at the shed’s door should do the job and that’s what I will be doing next.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
Be prepared for what Mother Nature dishes out Be prepared for what Mother Nature dishes out with the Cold Weather Survival Kit by Ready America. Our one-person emergency kit contains essential items such as lifesaving food and water survival blankets and body warmers tools to dig your vehicle out of the snow and more. Winter brings its own ... More + Product Details Close
Installing the actual ring was even easier. I was able to drill into grout lines between stones so I had that going for me. The hook up was super easy, two wires from the house connect to the two connectors on the Ring – doesn’t even matter which is which. Nice and easy. I will have to work out something to cover the shimmed side, but I’ll work something out.
In fact, some of my neighbors might testify to this. After Ring sent me the review unit, they also seeded some 20 of my neighbors with Rings of their own. The goal was to turn my neighborhood into something of a test bed for measuring how the doorbell can be deployed to reduce crime (or at least give homeowners more confidence in their own home security). Using the NextDoor social network, I asked neighbors for reviews.
This is the Spotlight Cam’s bigger, badder older brother. Equipped with two ultra-bright floodlights and a siren, the Floodlight Cam is impressive enough to scare away any potential intruders who approach your home. However, its extra power means it must be hardwired to weatherproof electrical boxes, an installation process that may limit where you’re able to set it up. However, if you want to feel secure and safe at all hours of the day, it might be worth the extra effort.
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
I started with the extra power pack that gets installed inside and connected to your door chime. It was the more complex part of the installation and involved a very tall ladder but it went well. I was impressed that the ring doorbell came with everything you need to install it – including the drill bit AND a screw driver. It even has extra bits you MIGHT need (like extensions wires and extra screws). I also really appreciated how everything was in separate baggies for which part of the install you were doing and was very well labeled (extras were labeled as extras, pro kit wires in one bag, doorbell wires and screws in another). I was unable to fit the power kit inside my chime housing but it doesn’t look bad attached to the wall just outside the chime housing (see picture). It’s just a bit larger than a matchbox.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
My connectivity issues notwithstanding, I’ve come to appreciate Ring’s motion alert feature, which sends the sound of a wind chime to your phone when someone approaches your door. Once you hear the chime, you can open a video window to talk with the visitor if you’re so inclined. Alternately, you can just let Ring’s cloud-based recording feature ($3 monthly or $30 annually) pick up the video of your visitor, and watch it later.