My Wi-Fi problems notwithstanding, both the doorbell and chime accessory were easy to pair with my wireless network. Just a word of caution: If you’re using a Wi-Fi range extender, make sure to pair the doorbell outside your house, right on your doorstep. This will ensure that Ring finds the extender, and not your router. If you pair the doorbell inside your home, you run the risk of pairing it with your main Wi-Fi router, especially if your router and range extender have different names.
Ring doesn’t have any contracts or other subscription-related requirements, but you do have the option of adding one of the video recording packages mentioned above. However, they do offer exclusive discounts and an extended warranty if you choose to purchase the upper tier package. Ring’s equipment comes with a one-year warranty, and if your doorbell is stolen, Ring will replace it for free.
The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
Feel the difference - Baldwin hardware is solid Feel the difference - Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home. ...  More + Product Details Close
The decision to separate the system’s brains—the base station—from the keypad is smart: It allows you to place the larger base station somewhere out of the way and put the smaller keypad near an entry door, where it’s easy to access. You can also deploy more than one keypad—one at the front door, one at the back, and one on your bedside table, for instance. Putting the base station somewhere other than near an entry door also enhances the system’s overall security: If burglars can’t find it quickly, they can’t disable the system.

The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
As a Contributing Editor for PCMag, John Delaney has been testing and reviewing monitors, TVs, PCs, networking and smart home gear, and other assorted hardware and peripherals for almost 20 years. A 13-year veteran of PC Magazine's Labs (most recently as Director of Operations), John was responsible for the recruitment, training and management of t... See Full Bio

If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.


One of the first things I did on the Pro was to draw the precise area I wanted the camera to monitor for motion. This process is done in the mobile app, using your finger, and allows you to highlight a sidewalk but ignore the street or an area where, perhaps, you have a wind chime hanging. As you can see above, I highlighted my entire entryway, sidewalk, and driveway. The street is eliminated completely.
3) Operational Use. I like being able to set up polygons for the motion detection zones. I was able to easily mark my drive way, flowerbeds and porch. I’ve never had a problem with the busy traffic from the road (something the security guy mentioned was a problem with his original Ring). There are two problems they need to work out: You will get a motion detect when the night vision clicks on in the evening and when it clicks off in the morning. Expect that.

System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.


So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.
×