When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
We paid Ring $30 for each doorbell yearly fee ($60 for both) which allows Unlimited video storage. You also are able to "Share" the recorded video which allows you to email the videos as you wish. I also found the laptop Ring application. While working on my laptop I can receive notifications, watch the live video, and/or answer all from my laptop.

For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
If you are able to find your transformer you can inspect it and 95% of the time it will have the rating directly on the front side of the transformer where the wires come off. If the transformer says it is 10V it is not compatible. If the transformer says 16V or 24V then it is most likely compatible with the new nest hello doorbell.  Below we show you what a non compatible transformer looks like and two options for compatible transformers if you end up replacing your existing doorbell transformer.  You also need to check the amperage rating of the transformer, it is typically written as VA in the picture below it shows a transformer not compatible with ring doorbell pro that has only 10V (voltage) and 5VA (amperage rating). The Ring Doorbell pro requires 30VA of amperage for power, so you could potentially have a transformer that is 16V but does not provide enough amperage. Checking the amperage rating of the transformer you are using with the Ring Doorbell is important. 
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.
Also, this is not a miracle product. It will only work as well as your internet connection. That means a little lag if you’re on a cable connection at peak times. There are a few times I’ve had the video come up in laggy and weirdly pixilated forms that took a second to work out. I’ve also noticed our voice connection is VERY quiet. As in, the person at the door can barely hear the person on the phone, so I consider that feature a bit useless. We managed to scare our cat sitter from the other side of the country and greet my mom, but I wouldn’t rely on it for communicating with people often. We managed to talk to our lawn service but we had to yell into the phone and they had to ask us to repeat ourselves a few times. Also we live on such a busy road that there is a lot of noise which makes the video sound very choppy. So again, I just consider this feature a novelty and not something to rely on.
I blame spotty home Wi-Fi for this particular performance problem. It’s not necessarily Ring’s fault that my Wi-Fi network is a weak link in its communication chain, but this is a product that relies on home Wi-Fi to work in the first place. The problems I suffered reveal an intrinsic, inescapable weakness in Ring’s workflow, and should remind us that all Internet-connected home appliances are only as strong as the weakest link in their networks.
The Ring Alarm has the electronics required to do all of that now, and Harris said those features will be turned on at some point. “You’ll see all of those things,” he said. “We’ll support color-changing lights, so that in a smoke situation, the lights will turn to a darker color to make it easier to see at night. You’ll see door locks with [Z-Wave’s] S2 security that will disarm the security system when you use the keypad to unlock the door, because we know you’ve done that in a secure way.”

Our favorite security system for do-it-yourself monitoring and home automation is the $280 Abode Essentials Starter Kit, because not only does it add professional monitoring to your home, but it also works as a smart hub for third-party devices and helps facilitate home automation. But if you're looking for something a little more affordable and dead-simple to set up, Ring Alarm is worth  a look.


Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
The Ring Video Doorbell Pro offers almost everything you'd want in a smart doorbell. It's fairly easy to install, sports a slender design with interchangeable faceplates, and delivers sharp 1080p video day and night. As with the August Doorbell Cam Pro, the Ring Pro uses pre-buffering technology to show you what transpired prior to a motion trigger, and lets you view live video on an id="354749">Amazon Echo Show device using Alexa voice commands.
I started with the extra power pack that gets installed inside and connected to your door chime. It was the more complex part of the installation and involved a very tall ladder but it went well. I was impressed that the ring doorbell came with everything you need to install it – including the drill bit AND a screw driver. It even has extra bits you MIGHT need (like extensions wires and extra screws). I also really appreciated how everything was in separate baggies for which part of the install you were doing and was very well labeled (extras were labeled as extras, pro kit wires in one bag, doorbell wires and screws in another). I was unable to fit the power kit inside my chime housing but it doesn’t look bad attached to the wall just outside the chime housing (see picture). It’s just a bit larger than a matchbox.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.

The backing plate is designed to mount on wood, brick, concrete, stucco, and aluminum siding, and the kit includes installation parts, like screws and a drill bit, to provide everything you’ll need. Unfortunately, using my cordless DeWalt drill, I couldn’t penetrate my home’s concrete, so I opted for heavy-duty double-sided tape. It works marvelously, and there’s a failsafe even if someone steals the doorbell: Ring will replace stolen doorbells free of charge, as long as you provide a police report.

Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.
×