The other major part of the Ring Alarm kit is the 5.9 x 3.9 x 0.9-inch keypad, which can also be laid flat or hung on the wall. The keypad has 12 backlit number buttons, as well as three other buttons for quickly arming and disarming the system (though it's also possible to do so from the Ring app for iOS and Android). The buttons are plastic and easy to clean, and by default, they chime when pressed. I like that the keypad is handheld, but I still much prefer the rubberized remote keypad offered by SimpliSafe.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
The Ring Alarm starter kit is one of the most affordable security systems available. For $200, you get a wireless base station, a keypad for arming and disarming the system, one entry sensor, one motion sensor and a Z-wave range extender. I would have liked the kit to include at least two entry sensors since there's typically more than one point of entry to every dwelling, but you can purchase additional entry sensors for $20 a piece.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
The picture isn’t quite as rosy if you’re also looking for a full-fledged smart home system. Ring Alarm is positively capable of being a great smart home controller. But it’s not that today. And to be fair, Ring isn’t promising that it ever will be—at least not officially. But they wouldn’t have built in Z-Wave, ZigBee, and whatever that third mystery radio is if they didn’t intend to go down that path.
If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.

Ring's major features include customizable motion zones, so that you'll only get an alert when a person enters a specific part of the frame. This can be helpful if the doorbell is aimed at a busy street, and you don't want to get an alert every time a car drives by. Ring also has a Neighborhood Alert feature, where you can view incidents from other Ring users in your area. Neither feature requires you to subscribe to a plan.


The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.

When it's time to pair the keypad, the Ring app will have you create a four-digit PIN for arming and disarming the system. If you choose to have professional monitoring, you'll need to also come up with a verbal password to help identify you in case you have to talk to a dispatcher. As a reviewer — and a person who has tripped  countless alarms in the last few months — I also appreciate that there's a seven-day trial period before professional monitoring becomes active, so you can take time to set up the system without worrying about false alarms. It also gives you time to register the alarm so that you do not incur any fees.


For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
We review the nest protect smart smoke detector and how it works with other nest smart home products. You may not know that the nest protect smart smoke detector can do a lot more than just detect smoke, it can also work with your nest thermostat and nest smart cameras to make your home safer. We talk about why the nest protect smoke detector is a good investment in safety for any home and the best features that we use with the nest protect smart smoke detector.  We also provide you with several useful tips and tricks when installing your smart home smoke detector to make your life easier when you install them and save you time. If you are considering what smart home smoke detector to buy this gives you a great overview of what the nest protect can do and why we have one installed in our home. 

Be prepared with a Ready America Cold Weather Be prepared with a Ready America Cold Weather Survival Kit. Our two-person kit contains essential lifesaving items including food and water survival blankets body warmers and hand warmers a snow shovel to dig your vehicle out of tight spots a flashlight/radio/cell phone charger and more. When winter comes cold weather ...  More + Product Details Close
Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
Snaplight lightbars create instant safe reliable light during Snaplight lightbars create instant safe reliable light during power outages evacuations severe weather and other emergencies. Fast-acting design turns on in a snap by mixing safe chemicals in a plastic casing to create instant light. Convenient hook allows simple placement in an optimal location.  More + Product Details Close
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
For larger spaces like your garage door or back patio, it might benefit you to invest in an additional motion detector. These devices can be configured to detect movement up to 30 feet, sending alerts to your phone whenever something enters the monitored area. As long as you mount the detector on a wall or corner of a room above seven feet, it shouldn’t be triggered by movement from small pets or pests, though that has still been known to happen.
The picture isn’t quite as rosy if you’re also looking for a full-fledged smart home system. Ring Alarm is positively capable of being a great smart home controller. But it’s not that today. And to be fair, Ring isn’t promising that it ever will be—at least not officially. But they wouldn’t have built in Z-Wave, ZigBee, and whatever that third mystery radio is if they didn’t intend to go down that path.
The Ring Alarm Security Kit should be every buyer’s first purchase when organizing their security system. It comes with a base station, which is like the central command hub for your Ring devices. The base station connects to your internet to keep your alarm system online; it can also activate sensors and receive notifications from your connected devices.
The Hampton Bay Wireless Battery Operated Doorbell Kit The Hampton Bay Wireless Battery Operated Doorbell Kit included 1 chime and 1 wireless push button. The Plug-in chime features a traditional Ding-Dong sound for the front entrance and a Ding for your back entrance. All Hampton Bay Wireless Push Buttons Door Bells and Alerts are compatible so you can ...  More + Product Details Close

It doesn't work with the Amazon Cloud Cam indoor home security camera, either. Here's what a Ring spokesperson had to say about it: "Ring Alarm does not work with Amazon Cloud Cam at this time. While I can't comment on the roadmap at this time, what I can tell you is that we will make product decisions based on what will best empower Neighbors with an affordable, effective way to monitor their homes."

The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Despite this, we now pay the $3 a month required to save our online footage - when it captures. We're out of the return window due to our many attempts to fix the device through Ring support. If I could do it over, I'd be tempted to send it back and try another brand. Everything else in our house gets a killer signal, so why this device can't get a signal from our router that's only 15 feet away is beyond me.
×