The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
With the Ring Video Doorbell Pro, I managed to almost eliminate false alarms, so that just about the only thing that set off an alert was an actual person at my front door. I occasionally got an evening alert when a car with exceptionally strong headlights went by—I presume because it illuminated the lawn and that was interpreted as movement—but the level was much lower.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
Feel the difference Baldwin hardware is solid throughout Feel the difference Baldwin hardware is solid throughout with a 60 year legacy of superior style and quality. Baldwin is the choice for an elegant and secure presence. Baldwin guarantees the beauty of our finishes and the performance of our craftsmanship for as long as you own your home.  More + Product Details Close
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.

If you unscrew your old doorbell you will see that there are two wires running to it and two terminals. You can take a multi-meter and measure the voltage across the two terminals. If it reads  in the range of 16V-24V you most likely have enough power for your Ring Doorbell Pro, but you sill need to check the amperage. We recommend the multi-meter below because it is the simplest to use without extensive knowledge of electrical workings. It has auto-ranging meaning you only need to turn the multimeter to the correct dial and it will tell what the voltage is. The correct "dial" setting to measure voltage is the "V" with the lines on top.  Even if your voltage is reading 16V you still need to check that you have 30VA of amperage from the transformer as this is the recommended amperage requirements from the manufacturer of the Ring Pro Doorbell. 
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
It catches us leaving for work every day and coming home. It catches me when I go to fill the bird feeders. I’ve not had it miss any movement that I’m aware of. If you have motion sensors on, expect more notifications than you think you will get. As said, you’ll get the two from nightfall and sunrise. Plus I get two from me departing for work and my husband departing plus 2 more for each of us coming home. Add on more for checking the mail and anything you may do in the yard. This is where not being limited on storage size is handy. The cloud storage is $30 per year and it keeps videos for 6 months. It doesn’t say anything about size so having these extra videos doesn’t bother me. I find the video quality to be great and I can easily identify who is at the door night and day.
The bottom half of the screen contains a historical list of all events (rings, motion triggers, and live view requests). Tap any event to view the associated video clip, share it, delete it, or save it. Tapping the Ring Pro button takes you to a screen where you can enable and disable ring alerts and motion alerts, view live video, and access the doorbell settings. When you tap the Live View button it launches a live stream presented in full-screen landscape mode and has buttons for two-way audio, speaker mute, and neighborhood sharing.

Ring can be hardwired to your existing doorbell’s electrical leads, but lacking any doorbell at all, I opted to use the device’s internal battery, which is charged with a USB cable (just like any typical mobile device), and is rated to last one year between charges. Pulling off the doorbell for recharging is a simple matter of removing two screws with a special tool that Ring provides, and then sliding the doorbell off a backing plate. It’s no big deal.


When it's time to pair the keypad, the Ring app will have you create a four-digit PIN for arming and disarming the system. If you choose to have professional monitoring, you'll need to also come up with a verbal password to help identify you in case you have to talk to a dispatcher. As a reviewer — and a person who has tripped  countless alarms in the last few months — I also appreciate that there's a seven-day trial period before professional monitoring becomes active, so you can take time to set up the system without worrying about false alarms. It also gives you time to register the alarm so that you do not incur any fees.

In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
The Ring Video Doorbell is battery-operated and Wi-Fi enabled. This HD video doorbell lets homeowners see and speak with visitors from anywhere by streaming live audio and video of a home's front doorstep directly to the free iOS or Android app. Built-in motion sensors detect movement up to 30 Ft. HD video records and stores to the cloud, which can be accessed via the Ring app. Quick and easy to set up, mounts and syncs in minutes and built-in battery, can also be powered through your existing doorbell wires.

This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.

Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.

Most people don't have their wifi routers right near the front door so it can be a challenge getting a strong wifi signal to the Ring Doorbell. The other challenge is that the wifi signal must extend beyond the inside of the house and through building materials like bricks, siding, insulation and wood. So even if you have a strong signal inside your house it doesn't mean that your going to have a strong wifi signal outside your home. 


By removing the battery, Ring has been able to make the Ring Video Doorbell Pro a bit slimmer and smaller than its first- and second-generation models. The Pro measures 4.5 inches x 1.85 inches x 0.8 inches (11.4 centimeters x 4.7 centimeters x 2.0 centimeters). That’s 6.7 cubic inches (108 cubic centimeters) versus 13.6 cubic inches (223 cubic centimeters) for the Ring Video Doorbell 2—an impressive reduction in volume of more than half.

In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
We paid Ring $30 for each doorbell yearly fee ($60 for both) which allows Unlimited video storage. You also are able to "Share" the recorded video which allows you to email the videos as you wish. I also found the laptop Ring application. While working on my laptop I can receive notifications, watch the live video, and/or answer all from my laptop.
This works well. The install is easy. I have one very major complaint. The blurb on Amazon does not explain that you have to pay for a cloud subscription to store and retrieve the short videos of motion events. The promotional material and install instructions are structured such that you do not catch this ¨gotcha" until the unit is installed and you use it for a day or 2. There is no provision to store these videos locally on your own computer. I am giving this just one star because they are not up front about the need for a paid subscription and the lack of a local event video storage option.
Ring can be hardwired to your existing doorbell’s electrical leads, but lacking any doorbell at all, I opted to use the device’s internal battery, which is charged with a USB cable (just like any typical mobile device), and is rated to last one year between charges. Pulling off the doorbell for recharging is a simple matter of removing two screws with a special tool that Ring provides, and then sliding the doorbell off a backing plate. It’s no big deal.
Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.
The Hampton Bay Wireless Battery Operated Doorbell Kit The Hampton Bay Wireless Battery Operated Doorbell Kit included 1 chime and 1 wireless push button. The Plug-in chime features a traditional Ding-Dong sound for the front entrance and a Ding for your back entrance. All Hampton Bay Wireless Push Buttons Door Bells and Alerts are compatible so you can ...  More + Product Details Close
The bottom half of the screen contains a historical list of all events (rings, motion triggers, and live view requests). Tap any event to view the associated video clip, share it, delete it, or save it. Tapping the Ring Pro button takes you to a screen where you can enable and disable ring alerts and motion alerts, view live video, and access the doorbell settings. When you tap the Live View button it launches a live stream presented in full-screen landscape mode and has buttons for two-way audio, speaker mute, and neighborhood sharing.
When Ring worked as advertised, it delivered on all its promises. I never had any suspicious characters press the button, but I blew my neighbor’s mind when I communicated with her—quite easily, through the doorbell—while I was on vacation in wine country, 80 miles away. Unfortunately, I couldn’t help her get into her house (she had locked herself out), but it was a striking illustration of what Ring can do.
×