There is currently no support for controlling the system with voice commands, but it should come as no surprise that Ring is developing an Alexa skill. Once you can arm your security system using a voice command, you won’t want to do it any other way (disarming it that way is whole other question). Harris was slightly more circumspect about supporting Google Assistant. “We remain committed to being open to all of the different pieces that are important to our customers. We’ll continue to march down the path of trying to support everything we can.” I got a similar answer when I asked about support for Apple’s HomeKit technology: “We’ve given it a lot of time. Again, we remain focused on bringing HomeKit support across the product line, but it won’t be available at launch with the Alarm products specifically.”

The real failure of this device is its “motion detection”. To illustrate, I’ve attached photos and video. It goes off about every 5 minutes (leaving battery life that lasts 3 days), even for things across the street, even though it’s supposed to have a 5’ range (also attached). The kicker is that it Doesn’t actually catch people coming up to the door. It only shows me coming in our out about 1 in 10 times. I even thought about making a video to show this, but it’s not worth my time for this Piece of junk. Bottom line:


Ring Video Doorbell lets you watch over your home and answer the door from your smartphone, tablet and PC. It sends you instant mobile alerts when people press your Doorbell or trigger the built-in motion sensors. And when you answer the alert, you can see, hear and speak to people on your property from anywhere. Ring Video Doorbell comes with everything you need to get it set up in just minutes. It can be powered by its internal rechargeable battery, or you can connect it to existing doorbell wiring for non-stop power. It also comes with a free 30-day trial of Ring Video Recording, so you can review, save and share all your Ring videos at anytime, anywhere.
Equipment sensor: I have an expensive four-wheeler and zero-turn mower in my backyard, and would like to see some kind of sensor (other than motion, too many plants and wind won’t make it practical) to protect these expensive items as well. This would be a great selling point; maybe like a magnetic plug stuck to a metal part of the bike’s body, that if it’s removed from that metal body it alerts the brain.

The Ring Alarm has the electronics required to do all of that now, and Harris said those features will be turned on at some point. “You’ll see all of those things,” he said. “We’ll support color-changing lights, so that in a smoke situation, the lights will turn to a darker color to make it easier to see at night. You’ll see door locks with [Z-Wave’s] S2 security that will disarm the security system when you use the keypad to unlock the door, because we know you’ve done that in a secure way.”


The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
With 1080HD video, custom motion zones and an ultra-slim design, Ring Video Doorbell Pro is our most advanced Doorbell yet. Ring Video Doorbell Pro sends you instant mobile alerts when anyone presses your Doorbell or triggers the built-in motion sensors. When you answer the alert, you can see, hear and speak to visitors from your smartphone, tablet or PC. With customizable motion zones, Ring Pro lets you focus on the most important areas of your home. It also includes four interchangeable faceplates, so you can pick a color that matches your style and your home. And with our complementary tool kit, you can get your Doorbell set up in just minutes.

The real failure of this device is its “motion detection”. To illustrate, I’ve attached photos and video. It goes off about every 5 minutes (leaving battery life that lasts 3 days), even for things across the street, even though it’s supposed to have a 5’ range (also attached). The kicker is that it Doesn’t actually catch people coming up to the door. It only shows me coming in our out about 1 in 10 times. I even thought about making a video to show this, but it’s not worth my time for this Piece of junk. Bottom line:


In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($150 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet. 
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.
Ring’s Alarm, which is finally shipping to customers starting today, is the latest in these new, do-it-yourself home security systems. It’s most similar to the Secure system that Nest released last year, and uses a variety of motion, entryway, and fire / carbon monoxide sensors, along with Ring’s other home security cameras to monitor your home for emergencies and intrusions.
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
This rugged camouflage backpack is full of emergency This rugged camouflage backpack is full of emergency supplies that will ensure that you are prepared to survive if you find yourself stranded or injured in the wilderness or other remote location. The contents have been carefully selected so that you can survive the first critical 72 hours of an ...  More + Product Details Close
So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.
×