Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
If the base station is the control center for your Ring devices, then the Amazon Echo Show is the main stage. This 10.1-inch HD screen with built-in speakers was practically made to complement your home security system. Set it up in the kitchen or living room, and you’ll be instantly connected to video and notifications from around your home. Someone at the door but you’re making dinner? Use the Amazon Echo Show to see who’s arrived. In addition to syncing with cameras and alarms, it can even listen for the sound of smoke detectors or broken glass. Talk about a smart security product.
The real failure of this device is its “motion detection”. To illustrate, I’ve attached photos and video. It goes off about every 5 minutes (leaving battery life that lasts 3 days), even for things across the street, even though it’s supposed to have a 5’ range (also attached). The kicker is that it Doesn’t actually catch people coming up to the door. It only shows me coming in our out about 1 in 10 times. I even thought about making a video to show this, but it’s not worth my time for this Piece of junk. Bottom line:
Aside from the app and the keypad, there isn’t currently another way to set the system. In comparison, Nest’s system can be set via key fobs, which are quicker and easier than punching in PIN codes or opening an app, or voice through the Google Assistant. Ring says that integration with Alexa will come down the road, but it is not available at this time.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
I recently purchased the new Ring security system after owning the video doorbell for a while. I bought this system to allow me to ditch my system and service from a large national provider (42$ per month for monitoring vs 10$)! Firstly, I have been interested in this product and company since I saw Jaime Siminoff on Shark Tank back in 2013. Back then the company was called DoorBot. I like the new name much better.
The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
The Ring Video Doorbell Pro offers almost everything you'd want in a smart doorbell. It's fairly easy to install, sports a slender design with interchangeable faceplates, and delivers sharp 1080p video day and night. As with the August Doorbell Cam Pro, the Ring Pro uses pre-buffering technology to show you what transpired prior to a motion trigger, and lets you view live video on an id="354749">Amazon Echo Show device using Alexa voice commands.
I went with the Ring Pro over the Original Ring because I was going to be wiring it in place anyway. I also like the slender profile and the possibility to use wireless 5.0 in the future if I desire. Plus I live on a very busy road and wanted the advanced motion detection zones on the pro. Since I did my research, I was aware that the Ring Pro has a 160 degree field of view compared to the 180 degree view of the original. For this reason, I purchased fiberglass shims to angle it more towards my large 6 foot doors when I installed it.
By removing the battery, Ring has been able to make the Ring Video Doorbell Pro a bit slimmer and smaller than its first- and second-generation models. The Pro measures 4.5 inches x 1.85 inches x 0.8 inches (11.4 centimeters x 4.7 centimeters x 2.0 centimeters). That’s 6.7 cubic inches (108 cubic centimeters) versus 13.6 cubic inches (223 cubic centimeters) for the Ring Video Doorbell 2—an impressive reduction in volume of more than half.
Despite our internet running at 300mpbs or faster, our Ring struggles to pick up a solid signal from our router, which is no more than 15 feet from the RING. The several times I've contacted the Ring support team they've been very friendly. They even sent us a signal boosting Chime Pro for free to help with the signal problem. Unfortunately this only made the signal worse according to the support team.