Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.

Moving on...If you are installing the hard wired RIng doorbell version (not wireless) just remember to shut off the power to the doorbell prior to installing. I installed the doorbell, downloaded the free application for my wife and I, added the adapters to my current doorbell, and set the "Motion Zone". The entire process took approximately 40 minutes. Having the set "Motion Zones" helps us out a lot so we do not get "Motion Detected" alerts from people on the sidewalk but anything closer to my home it goes off. Everything works flawlessly and the speaker sounds great. Images and video during day and night are clear. No issues hearing the person at my door nor them hearing me. My wife loved it as much as I did and we decided to get a second one for our second door (plus it was a Amazon special we could not pass up!).

Sometimes, small changes can lead to big benefits—like keeping your loved ones safe. Thanks to the Ring suite of flexible technologies, changes that once might have seemed too tricky or troublesome to execute—such as outfitting your home with an intuitive security system and related accessories—are now a hassle-free and wallet-friendly process. So, no more excuses! Available at QVC.com, Ring products integrate with smart technologies to deliver up-to-the-minute information wherever you are.

Sometimes you can't find your doorbell transformer, or it's inaccessible, or the engraving on the side of the transformer has worn off and there is no way inspect the transformer and determine how much voltage it is putting out. In those cases, go ahead and try and install the Ring Pro Doorbell, follow all of the instructions in the Ring app and the worst case scenario is that your Ring doesn't have enough power.  Your Ring doorbell will indicate that it does not have enough power by either not working or once you install it you can go to the settings menu and check the "device health" tab and it will show you the amount of power the doorbell is receiving. . If our Ring Pro Doorbell does not have enough power you will need to upgrade your transformer to one of the two transformers we have recommended above or you can find them at the links below: 
When we reviewed the original Ring Video Doorbell three years ago, it earned high marks for its easy installation, sharp video quality, and motion detection, but was dinged for its middling audio quality, lack of on-demand video, and short battery life. With the new Video Doorbell Pro ($249), Ring has addressed all of these gripes and added some handy features including 1080p video, custom motion zones, pre-buffering to capture what was going on before the motion sensor was triggered, support for Alexa voice commands, and interoperability with other smart devices via IFTTT. All this earns it our Editors' Choice for video doorbells.

Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.
How To: Wemo Light Switch Installation No Neutral Wire. We teach you what you can do if you don’t have a neutral wire in your existing switch boxes but still want to install a Wemo light switch. There are four alternative options for installing a Wemo light switch with no neutral wire. We tell you how you can add a neutral wire to your existing switch box so you can install a wemo lights switch or use another smart light switch that has all of the same features as the wemo light switch but does not require a neutral wire. If you don’t want to do any wiring in your home and you don’t have an existing neutral wire you can also you smart light bulbs like the phillips hue light bulbs instead of the wemo light switch. We teach you how you can connect any of your smart light switches to Amazon Alexa for full voice control of your home.
Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
As a Contributing Editor for PCMag, John Delaney has been testing and reviewing monitors, TVs, PCs, networking and smart home gear, and other assorted hardware and peripherals for almost 20 years. A 13-year veteran of PC Magazine's Labs (most recently as Director of Operations), John was responsible for the recruitment, training and management of t... See Full Bio
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.
Most people don't have their wifi routers right near the front door so it can be a challenge getting a strong wifi signal to the Ring Doorbell. The other challenge is that the wifi signal must extend beyond the inside of the house and through building materials like bricks, siding, insulation and wood. So even if you have a strong signal inside your house it doesn't mean that your going to have a strong wifi signal outside your home. 
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.

Never wonder who’s knocking at your door again. With the Ring Doorbell, you’ll receive alerts when your doorbell is pressed or motion is detected, allowing you to hear and interact with visitors. In addition to acting as a two-way communication device for your front door, it works as a security system; you can set motion detection zones from five to 30 feet outside your door. The sensor is quite sensitive, so it’s probably best to set its range and awareness levels as low as you’re comfortable with. If you’re willing to venture off Amazon (and pay a little more), the Nest Hello doorbell is another favorite option that works with Alexa.
I set up the new system with ease. It Took about 45 minutes! I have to give props to Mr. Siminoff for adding in this 7 day training period which allowed me to learn the new equipment without the fear of having the authorities show up. Thank God someone is thinking outside the box. My last alarm system that was much more expensive and hardwired, came with no training at all and no grace period for learning. As a result, I set it off multiple times by mistake and actually got a fine from my town because the cops showed up to the false alarm. That said, this was a much better initial experience.

I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
The rest of the kit remains relatively standard. The Ring Alarm entry sensors are about a quarter-of-an-inch bigger than SimpliSafe's sensors and don't perform double duty like Nest's large sensors, which also sense motion. They're easy to install with the included mounting hardware and 3M-branded sticky tape, but they seem unnecessarily large and were hard to place so that the magnets would meet each other on both my front door and the back sliding door.
In February 2018 at 2AM Ring came in handy. I received the "Motion Detected" alert on my phone and saw an unknown, adult, male, holding a large black object near his side, walking up my driveway, and towards my front door. The male looked directly at the Ring, stopped, turned around, walked back into the street, got into a vehicle and left. I like to believe Ring deterred this guy from committing a crime. After that moment I remembered I never did an Amazon review for Ring. So here it is. Do yourself and/or family a favor and get the Ring. Peace of mind and makes life easier. SEE ATTACHED PICTURES FOR DETAILS.

One of the chief concerns when buying a video doorbell is the video quality. The Nest Hello comes with a resolution of 1600 x 1200. That's lower than the Ring Pro (1920 x 1080), but Nest's camera also supports HDR, which we found helped when a visitor was shaded (when standing on a covered porch, for instance) and the background was brightly lit. Both cameras have a 160-degree field of view and infrared night vision.
Disclosure: This post is brought to you by the Insider Picks team. We highlight products and services you might find interesting. If you buy them, we get a small share of the revenue from the sale from our commerce partners. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We operate independently from our advertising sales team. We welcome your feedback. Email us at insiderpicks@businessinsider.com.
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
With the Ring Video Doorbell Pro, I managed to almost eliminate false alarms, so that just about the only thing that set off an alert was an actual person at my front door. I occasionally got an evening alert when a car with exceptionally strong headlights went by—I presume because it illuminated the lawn and that was interpreted as movement—but the level was much lower.
This is the Spotlight Cam’s bigger, badder older brother. Equipped with two ultra-bright floodlights and a siren, the Floodlight Cam is impressive enough to scare away any potential intruders who approach your home. However, its extra power means it must be hardwired to weatherproof electrical boxes, an installation process that may limit where you’re able to set it up. However, if you want to feel secure and safe at all hours of the day, it might be worth the extra effort.

Once you have your Ring Doorbell installed you want to make sure you have a strong reliable wifi signal getting too the doorbell. If you don't have a strong signal or if it's slow you will have choppy video on the Ring Doorbell or receive notifications from your doorbell with a delay.  You won't be seeing the real time footage of what is happening at the front door if you have poor wifi signal strength. 
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
2) Install. I was a bit intimidated with the install as I’ve never wired anything up before and our house is new construction. But the YouTube video and pamphlets made it pretty clear to follow. They also emphasize that you can call them at any point for assistance. I had also been told by the security system guy that install was super easy and I could do it myself (he’s also the one who gave me the tip about the fiberglass shims). He also gave me an extra tidbit for those of us with stone or brick exteriors: drill into the grout lines – they drill easy; stone does not.

Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
The Ring system offers many different types of cameras; which one (or ones) you choose will depend on your unique configuration needs. The Ring Stick Up Cam is a fairly versatile option, letting you monitor both indoor or outdoor areas in 1080p HD video. It can also rest on a flat surface or be mounted to a wall or ceiling. Like the Ring Doorbell, this camera allows two-way talk, so you can see and speak to whoever’s on the other end of the lens using your phone or connected device.
This is the Spotlight Cam’s bigger, badder older brother. Equipped with two ultra-bright floodlights and a siren, the Floodlight Cam is impressive enough to scare away any potential intruders who approach your home. However, its extra power means it must be hardwired to weatherproof electrical boxes, an installation process that may limit where you’re able to set it up. However, if you want to feel secure and safe at all hours of the day, it might be worth the extra effort.
* Advertised Price Per Month: The advertised price per month is the estimated monthly payment required to be made on your WebBank/Fingerhut Advantage Credit Account for a single item order, or if at any time your account has multiple items on it, then please see the payment chart for payment terms. The advertised price per month will not apply. See Full Cost of Ownership.
If you are able to find your transformer you can inspect it and 95% of the time it will have the rating directly on the front side of the transformer where the wires come off. If the transformer says it is 10V it is not compatible. If the transformer says 16V or 24V then it is most likely compatible with the new nest hello doorbell.  Below we show you what a non compatible transformer looks like and two options for compatible transformers if you end up replacing your existing doorbell transformer.  You also need to check the amperage rating of the transformer, it is typically written as VA in the picture below it shows a transformer not compatible with ring doorbell pro that has only 10V (voltage) and 5VA (amperage rating). The Ring Doorbell pro requires 30VA of amperage for power, so you could potentially have a transformer that is 16V but does not provide enough amperage. Checking the amperage rating of the transformer you are using with the Ring Doorbell is important. 
The Ring Alarm system does not include fire or carbon monoxide monitoring – for those features, you’ll need to add a First Alert Z-Wave Smoke/CO alarm ($40) or Ring’s Alarm Smoke and CO listener ($35) that gets installed next to your existing smoke alarms and “hears” when they go off to trigger the system. I was not able to test these products for this review.

This versatile Hampton Bay Door Bell Chime works This versatile Hampton Bay Door Bell Chime works in any home installation. For a Wired installation you'll need a Wired Push Button and a 16 VAC/10 VA Low-Voltage Transformer. To use wirelessly you'll need 3 "C" batteries and a Hampton Bay Wireless Push Button. Replacing your current basic Door Bell ...  More + Product Details Close
* Advertised Price Per Month: The advertised price per month is the estimated monthly payment required to be made on your WebBank/Fingerhut Advantage Credit Account for a single item order, or if at any time your account has multiple items on it, then please see the payment chart for payment terms. The advertised price per month will not apply. See Full Cost of Ownership.
Sometimes you can't find your doorbell transformer, or it's inaccessible, or the engraving on the side of the transformer has worn off and there is no way inspect the transformer and determine how much voltage it is putting out. In those cases, go ahead and try and install the Ring Pro Doorbell, follow all of the instructions in the Ring app and the worst case scenario is that your Ring doesn't have enough power.  Your Ring doorbell will indicate that it does not have enough power by either not working or once you install it you can go to the settings menu and check the "device health" tab and it will show you the amount of power the doorbell is receiving. . If our Ring Pro Doorbell does not have enough power you will need to upgrade your transformer to one of the two transformers we have recommended above or you can find them at the links below: 
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
The Ring Video Doorbell Pro offers almost everything you'd want in a smart doorbell. It's fairly easy to install, sports a slender design with interchangeable faceplates, and delivers sharp 1080p video day and night. As with the August Doorbell Cam Pro, the Ring Pro uses pre-buffering technology to show you what transpired prior to a motion trigger, and lets you view live video on an id="354749">Amazon Echo Show device using Alexa voice commands.
Ring offers a wide variety of doorbell and exterior security lighting features that range in price from $99.99 to $499.00, as well as plenty of accessories for them that range in price from $10.00 to $49.00. These accessories include options such as a solar panel, ring chime, quick release battery pack and more. And, they have two monthly video recording packages that range from $3.00 per month ($30 annually) to $10.00 per month ($100 annually).
×